Those who be used at planar milling cutter of WIDIA Victory M1200 is brand-new bit

  • Time:
  • Click:72
  • source:JANEZH CNC Machining
-- more is aimed at aluminium alloy / what the milling of the material that be not iron machines series of planar milling cutter of WIDIA Victory M1200TM is brand-new application of WIDIATM brand razor blade is mixed very generally successful, outstanding result can be achieved when the most general in aluminium alloy rough machining, half essence and finish machining especially, it also suits to machine other to be not iron material (this product is exhibited in IMTS 2010 exhibit on the meeting) . The chamfer that this razor blade can offer 2 kinds to differ, these two kinds of razor blade and milling cutter of WIDIA Victory M1200 cooperate to use, will give all milling aluminium alloy and the user of the material that be not iron to bring a profit. Every razor blade has 12 cutting blade, the chamfer with light cutting reduced machine tool power to use up, use rise special economy. The union of tenacity and wearability can achieve higher feed rate, this is current rotate speed of tall main shaft and convention are cut in great majority deep (amount to at most 4.

5mm or 0.

The good solution of 180inch) machining center. LDJ chamfer have special for cutting light and the design optimizes before horn. This razor blade has 12 cutting blade, 2 kinds of material pledge optional, THMU and TN6501 (besmear has TiB2 coat) . Two kinds of razor blade pass polish of height of face of the knife before periphery grinding is mixed, THMU is the first selection of the most material that be not iron, and the TN6501 that besmear has TiB2 coat, because the coefficient of friction of coating is very low, because this is machining tall silicon aluminium (> more light cutting is offerred when 8%) . LDJ3W chamfer for Xiu Guangren groove, can use at needing the treatment of admirable surface quality, it has blade of 3 RH cutting and blade of 3 LH cutting, also can offer THMU and TN6501 two kinds of material are qualitative. LDJ and LDJ3W razor blade have wonderful tenacity, wearability and wear, can resist the tumour that accumulate bits, reduce burr and the quality that improve treatment appearance. "Photograph comparing is current other is double-faced bit platform, the design of WIDIA Victory M1200 is very conspicuous " , the Josef Fellner of global product manager of group of milling of machine clip type says, "It is course test and verify optimal system, these new razor blade are used up through taller feed is led and reducing power, the made economy that makes first selection of aluminium alloy milling cutting tool. The made economy that makes first selection of aluminium alloy milling cutting tool.. CNC Milling CNC Machining