The simple and easy method of cut mirror spare parts

  • Time:
  • Click:137
  • source:JANEZH CNC Machining
Low speed of A500W of the Dick that use sand takes a cut of electric spark line if machine treatment pursues when shows sunken pattern, the system of APTC(automatic process designing that wants the MARK-21 system in this machine tool only) in make a plan the CNC program of 1, pursue in treatment when 2 spare partses, do not need new process designing. Because pursue 1 with the graph the Y in two graphs of 2 is worth changeless, cost of ｜ X ｜ is fixed, the X that is them only is worth, negative is turned over, pursue namely the 2 mirror graphs that are graph 1X axis. So, mirror of usable G05(X axis) the instruction will solve this one problem. Graph 1 graph 2 specific meanses are: Edit by EDIT() file of key, FILE() key, mobile cursor discovers a scheme the file name of 1; Carry out by ENT() key, v pursues the NC of 1 machine program; Press EDIT key, the G54 in this program and G92 insert G05 instruction between two instructions, in the T85 with last main program and M02 G09(is inserted to cancel a mirror between two instructions) instruction. Eliminate C000 ～ H003 and T89 statement with key; Move by GRAPH(graph) contrail of treatment of key, HF2(is painted) key, right now on screen painted the graph after the mirror of axis of 1X giving a picture (pursue namely 2) . Can see cut direction changeover from inside the graph, go against wind shear so to be cut to arrange, because G05 is added before G92 dictates, the compensation direction of reason and electrode silk has nothing to do, the spare parts that cut comes out accords with blueprint requirement completely. After the program carries out G05 to dictate, character of the X that screen shows, U and their value turns into gules, at the same time X is worth, lose as contrary as the X value in the program. If be G06(Y axis mirror) instruction, so character of the Y that screen shows, V and their value turns into gules, the Y value symbol in Y value and program is contrary. After the program carries out G09 to dictate, the mirror cancels, x, U or Y, V turns into green shows. If machine punch mirror spare parts, also can use same method. If be the mirror graph of Y axis, need to convert only G06 dictates can. CNC Milling CNC Machining